User guide

Page 132 - Pointmaker CPN-5600, CPN-6000 Color Video Markers Boeckeler Instruments, Inc.
Overview Section Six:Using RS-232 Commands
(VCD) Display Change of Video Input
e “VCD” command tells the Pointmaker whether to display a change of video
input on the monitor.
<Esc>(VCDØ Do not display a change in the video input
<Esc>(VCD1 Display a change in the video input
<Esc>(VCDT Toggle between the two modes
(VI) Video Input
e “VI” command tells the Pointmaker to move forward or backward in
choosing a video input.
<Esc>(VIN Next video input
<Esc>(VIP Previous video input
(VIH) Enable or Disable HDCP Input
e “VIH” is a master switch for handling HDCP Input throughout the Point-
maker. If it is turned off, no HDCP content can pass through the Pointmaker. If it
is turned on, HDCP sources are handled according to your current “HI” settings.
<Esc>(VIHØ HDCP input is off
<Esc>(VIH1 HDCP input is on
<Esc>(VIHT Toggle between the two modes