User guide

Boeckeler Instruments, Inc. Pointmaker CPN-5600, CPN-6000 Color Video Markers - Page 127
Section Six:Using RS-232 Commands Overview
(SCO) Scaler Output Format
e “SCO” command is used to set the scaler output to the desired format.
<Esc>(SCOnn Setting “nn” is the numeric value taken from the table
below to designate the format to be output by the scaler
Example: <Esc>(SCO09
640 x 480 @ 60 Hz 00
640 x 480 @ 72 Hz 01
640 x 480 @ 75 Hz 02
640 x 480 @ 85 Hz 03
800 x 600 @ 56 Hz 04
800 x 600 @ 60 Hz 05
800 x 600 @ 72 Hz 06
800 x 600 @ 75 Hz 07
800 x 600 @ 85 Hz 08
1024 x 768 @ 60 Hz 09
1024 x 768 @ 70 Hz 10
1024 x 768 @ 72 Hz 11
1024 x 768 @ 75 Hz 12
1024 x 768 @ 85 Hz 13
1280 x 1024 @ 60 Hz 14
1280 x 1024 @ 72 Hz 15
1280 x 1024 @ 75 Hz 16
1280 x 720P @ 60 Hz 17
1920 x 1080P @ 60 Hz 18
1280 x 800 @ 60 Hz 19
1440 x 900 @ 60 Hz 20
1680 x 1050 @ 60 Hz 21
1400 x 1050 @ 50 Hz 22
1400 x 1050 @ 60 Hz 23