User guide

Boeckeler Instruments, Inc. Pointmaker CPN-5600, CPN-6000 Color Video Markers - Page 125
Section Six:Using RS-232 Commands Overview
(PA) Pass-through
e “PA” command enables the video image to “pass-through” the system without
displaying the marker overlay.
<Esc>(PA1 Enable pass-through. (overlay is hidden)
<Esc>(PAØ Disable pass-through. (overlay is displayed)
<Esc>(PAT Toggle pass-through.
(PT) Pointer Type
e “PT” command controls the display of pointer types contained in the
Pointmaker.
<Esc>(PTC Displays Circle
<Esc>(PTDL Display Down Left Arrow
<Esc>(PTDØ Display Down Arrow
<Esc>(PTDR Display Down Right Arrow
<Esc>(PTL Display Left Arrow
<Esc>(PTN Hide Pointer
<Esc>(PTP Display Cross Hairs
<Esc>(PTR Display Right Arrow
<Esc>(PTSC Display Small Circle
<Esc>(PTSP Display Small Cross Hairs
<Esc>(PTT1 Enable pointer toggle.
<Esc>(PTT2 Turn pointer off.
<Esc>(PTT3 Turn pointer on.
<Esc>(PTT4 Toggle pointer on/off.
<Esc>(PTT5 Display next pointer
selects next pointer in the sequence.
<Esc>(PTTØ Disable pointer toggle.
<Esc>(PTUL Display Up Left Arrow
<Esc>(PTUØ Display Up Arrow
<Esc>(PTUR Display Up Right Arrow