User guide

Boeckeler Instruments, Inc. Pointmaker CPN-5600, CPN-6000 Color Video Markers - Page 121
Section Six:Using RS-232 Commands Overview
(I) Marker Intensity or Brightness
e “I” command sets the intensity or brightness level for markers. Positive or
negative values may be coded.
<Esc>(ISXXX Set the brightness level (absolute). XXX is numeric value between
0 and 999.
<Esc>(ICXXX Increases brightness level (relative). XXX is numeric value
between 0 and 999.
<Esc>(IC-XXX Decreases brightness level (relative). XXX is numeric value
between 0 and 999.
(IFD) Set Image File Directory
e “IFD” command sets the directory for the image file to be saved.
<Esc>(IFDccc... Set the file directory. ccc... is no more than 16 characters,
terminated with a carriage return.
(IFI) Set Image File Index
e “IFI” command sets the image file index, designating where the numbering of
saved images will start.
<Esc>(IFInnnnn Set the image file index. nnnnn is a five digit number. e
combination of image file prefix and index must be equal to or
less than 8 characters.
(IFP) Set Image File Prefix
e “IFP” command sets the image file prefix to be used for saved images.
<Esc>(IFPccc... Set the image file prefix. ccc... is less than or equal to 3 characters,
terminated with a carriage return.
e combination of image file prefix and index must be equal to
or less than 8 characters.