User guide

Page 120 - Pointmaker CPN-5600, CPN-6000 Color Video Markers Boeckeler Instruments, Inc.
Overview Section Six:Using RS-232 Commands
(FS) Frame Size
e “FS” command defines an active frame.
<Esc>(FSXXXXYYYY Designating the size of an active frame.
XXXX = a numeric value for the horizontal dimension.
YYYY = a numeric value for the vertical dimension.
Units range from ØØØ1 to 2Ø48.
(FT) Frame Type
e “FT” command tells the Pointmaker which type of frame to display on-
screen.
<Esc>(FTBØ Box Frame
<Esc>(FTB1 Filled Box Frame
<Esc>(FTCØ Circle Frame
<Esc>(FTC1 Filled Circle Frame
<Esc>(FTN Next Frame
(HI) HDCP Input setting for each HDMI input port
e “HI” command designates which HDMI input ports will allow HDCP
sources to be passed to the video outputs. See also the VIH command.
<Esc>(HInØ HDCP input is off for port “n”. “n” is a numeric value of 5-9
designating HDMI Input ports 5-9.
<Esc>(HIn1 HDCP input is on for port “n”. “n” is a numeric value of 5-9
designating HDMI Input ports 5-9.
<Esc>(HInT Toggle between the two modes for port “n”. “n” is a numeric value of
5-9 designating HDMI Input ports 5-9.