User guide

Page 116 - Pointmaker CPN-5600, CPN-6000 Color Video Markers Boeckeler Instruments, Inc.
Overview Section Six:Using RS-232 Commands
(DO) Display Output
(to be implemented soon - contact us for status 520-745-0001)
e “DO” command enables or disables video output for HDMI or VGA output.
RS-232 commands remain the same for each Pointmaker model, so models with
identical features continue to function with no code change. With this unit, each
“Video Output” port on the back panel is labeled with a unique number to
simplify port locating and troubleshooting for the system integrator. Notes are
included to clarify the correspondence to the new labels.
<Esc>(DOVØ Disable VGA output (labeled port 1 on rear panel)
<Esc>(DOV1 Enable VGA output (labeled port 1 on rear panel)
<Esc>(DOVT Toggle VGA output (labeled port 1 on rear panel)
<Esc>(DODØ Disable 1st HDMI output (labeled port 2 on rear panel) Supports
what was DVI-D control code from previous model. e HDMI
output ports support DVI-D through the use of a HDMI to
DVI-D adapter.
<Esc>(DOD1 Enable 1st HDMI output (labeled port 2 on rear panel) Supports
what was DVI-D control code from previous model. e HDMI
output ports support DVI-D through the use of a HDMI to
DVI-D adapter.
<Esc>(DODT Toggle 1st HDMI output (labeled port 2 on rear panel) Supports
what was DVI-D control code from previous model. e HDMI
output ports support DVI-D through the use of a HDMI to
DVI-D adapter.
<Esc>(DOHØ Disable 2nd HDMI output (labeled port 3 on rear panel)
<Esc>(DOH1 Enable 2nd HDMI output (labeled port 3 on rear panel)
<Esc>(DOHT Toggle 2nd HDMI output (labeled port 3 on rear panel)
(DP) Drop Marker
e “DP” command drops an active marker (pointer, frame, label or cursor) using
the XY coordinate grid (see “X-Y Coordinate Grid” upage 97). e coordinates
are: XXXX = a numeric value for the horizontal axis point and YYYY = a numeric
value for the vertical axis point.
<Esc>(DPXXXXYYYY Drop an active marker at coordinates XXXX and YYYY
Example: <Esc>(DPØØ25ØØ37