User guide

Boeckeler Instruments, Inc. Pointmaker CPN-5600, CPN-6000 Color Video Markers - Page 113

Section Six:Using RS-232 Commands Overview

(CPW) Read Speciﬁc Image From SMB

e “CPW” command reads an image from the SMB server. is com mand uses

the current Computer and Share names assigned for capturing images. e nnnnn

part of the command is the index number of the image you want to read.

<Esc>(CPWnnnnn Read the requested image from the SMB location

nnnnn is the index number of the image

(CS) Color Selection

e “CS” command handles color attributes of an active marker. ese com mands

will force an “enable” of the color selected without having to enable that color

using the “CE” commands or going to the Menu System.

<Esc>(CSB Select Black

<Esc>(CSC Select Cyan

<Esc>(CSD1 Display Color Change

display a sample block of the new color. May be desired if a

pointer is not being displayed. e option may not be desired

if you wish to change col ors during a live broadcast.

<Esc>(CSDØ Do not display color change

<Esc>(CSDT Toggle color change display

<Esc>(CSE Select Previous Color

<Esc>(CSG Select Green

<Esc>(CSHG Select Green Highlight Color

<Esc>(CSHP Select Pink Highlight Color

<Esc>(CSHY Select Yellow Highlight Color

<Esc>(CSMH Select Highlight Color Mode

<Esc>(CSMM Select Multiplex Color Mode

<Esc>(CSMT Toggle between color modes

<Esc>(CSN Select Next

get next available color (see “(CE) Color Enable” on p.101).

<Esc>(CSP Select Pink

<Esc>(CSR Select Red

<Esc>(CSW Select White

<Esc>(CSY Select Yellow