User guide

Boeckeler Instruments, Inc. Pointmaker CPN-5600, CPN-6000 Color Video Markers - Page 101
Section Five:Image Mobility Image Manipulation
2. Entertheimageindexnumberfortheimageyouwishtoretrieveandselect
OK.
Only the number is to be entered. e prefix of the file is determined by the
settings in the Image File dialog(see Figure 3-14: File Defaults dialog, on page
46). If you have changed the prefix setting in order to help group files for a
particular purpose, make sure the prefix in the Image File dialog matches the
prefix of the file you are attempting to retrieve.
e file extension must be “bmp”.
e image is displayed on the screen.
Printing Images
e CPN-5600 allows you to print to a color Postscript printer either directly or
over a TCP/IP network. If you print directly, the configuration requires a USB to
Centronics cable. Contact Boeckeler Instruments if you want to use a direct
connection. To print over a TCP/IP network requires an ethernet cable and the
address of the printer (see Printer Setup, on page 60).
To print an image
1. Printanimageinoneofthefollowingways:
a)(touchscreen)TouchtheCenter-Rightcommandarea.
b)(digitaltablet)Activatethe“Print”button.
c)(keyboard)Type“Alt-F4”.
2. eimageissenttotheprinter.
A counter appears at the lower-right portion of the screen, indicating the
percentage of the image sent to the color Postscript printer.
When the counter reaches 100, it disappears. e system is then ready to print
another image.