User manual

96 Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015
Chapter 4 Configure a Project for Integrated Motion on the EtherNet/IP Network
The New Module configuration tabs appear.
5. Typ e a name for the module.
6. If you want, type a description.
7. Assign the Ethernet address of the 1756-ENxTx module.
For information on creating an Ethernet network and setting IP addresses
for the communication and motion modules, see these manuals:
– EtherNet/IP Modules in Logix5000 Control Systems User Manual,
publication
ENET-UM001
– PowerFlex 755 Drive Embedded EtherNet/IP Adapter User Manual,
publication, 750COM-UM001
– Knowledgebase Technote # 66326
– Converged Plantwide Ethernet (CPwE) Design and Implementation
Guide, publication
ENET-TD001
8. Assign the slot for the module.
9. In the module definition area, click Change.