User manual

Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015 75
Configure Integrated Motion Using a PowerFlex 755 Drive Chapter 2
The Motor Feedback dialog box contains the information for the feedback
device. This category dialog box is not available for Frequency axis configuration
and is dependent on the axis configuration type and the motor selection.
Select a Feedback Type and Units. The type of feedback available depends on the
axis and feedback configurations.
1. From the Type pull-down menu, choose the appropriate type of motor
feedback.
2. Click Apply and OK to exit the Motor Feedback dialog box.
3. Set the commutation alignment type and the percentage of offset.
The asterisk next
to a category
means that you
have not applied
changes.
TIP
All commutation attributes apply only to permanent magnet motors.