User manual

Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015 71
Configure Integrated Motion Using a PowerFlex 755 Drive Chapter 2
Motor Model Dialog Box
The Motor Model dialog box displays additional information based on the
motor, axis, and feedback configuration types you choose.
• If the motor data source is Catalog Number, the fields are populated
automatically from the database and the fields are read-only.
• If the motor data source is Nameplate Datasheet, you can to enter the
information.
• If the motor data source is Drive NV, the data comes from the nonvolatile
memory of the drive.
• If you select Catalog Number, Motor NV, or Drive NV, the values display
as read-only.
Motor Analyzer Dialog Box
The Motor Analyzer provides the following three tests:
• Dynamic Motor
• Static Motor
• Calculate Model
The tests analyze motor parameters for rotary and linear induction motors and
permanent magnet motors. The parameters that appear on the tests are
dependent on the motor type you choose.
TIP
You can leave the default values, go online, and run a Motor Test to get the
proper values from the drive.
See Hookup Tests Dialog Box on page 150
.
TIP
If the motor you are using is a Permanent Magnet, the Dynamic Motor is the
only test that appears.
The asterisk next
to a category
means that you
have not applied
changes.