User manual

64 Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015
Chapter 2 Configure Integrated Motion Using a PowerFlex 755 Drive
Associate the Axis to the Motion Group
There are three ways to assign axes to a Motion Group:
• Create a motion group. The Motion Group wizard appears and takes you
through the necessary screens.
• Open the Motion Group properties and make changes.
• Drag the axis into the Motion Group in the Controller Organizer.
1. Select an axis and click Add.
2. Verify that the axis has been assigned to the group.
3. Click OK.
The axis appears under the Motion Groups.