User manual

Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015 53
Configure Integrated Motion Using a PowerFlex 755 Drive Chapter 2
See Create an Axis for a PowerFlex 755 Drive on page 54.
When you change parameters, other related parameters change as well.
This message always appears after you have changed a configuration. This
message is a reminder that when you change the power structure the
identity of the drive changes. If your drive is associated to an axis and you
change the power structure, the axis is disassociated.
Even though a feedback card has been selected, the drive is not configured.
You must associate the axis first, and then you have the options to
configure a feedback module.
3. On the General Tab, click OK to apply the changes.
IMPORTANT
When you change the major revision on the PowerFlex 755 drive,
change the power structure, or change the peripheral feedback
device, the axis is no longer associated with the modules.