User manual

50 Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015
Chapter 2 Configure Integrated Motion Using a PowerFlex 755 Drive
6. Type a Name for the module
7. Type a description, if desired.
8. Assign an EtherNet/IP address.
See these manuals for information about configuring IP addresses:
• PowerFlex 755 Embedded EtherNet/IP Adapter User Manual,
publication 750COM-UM001
• Ethernet User Manual, publication ENET-UM001
9. Under Module Definition, click Change.
The Module Definition dialog box appears.
ATTENTION: The electronic keying feature automatically compares the
expected module, as shown in the configuration tree, to the physical
module before communication begins.