User manual

42 Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015
Chapter 1 Configure Integrated Motion Control Using Kinetix Drives
Choose Motor NV
When you choose Motor NV as the data source, the motor attributes are derived
from nonvolatile memory of a motor-mounted smart feedback device that is
equipped with a serial interface. Only a minimal set of motor and motor
feedback (Feedback 1) attributes are required to configure the drive.
1. From the Motor dialog box of Axis Properties, choose Motor NV.
2. Choose the Motor Units that are associated with the motor, either Rev for
rotary motor or Meters for linear motor.
No other motor information is needed.
3. Click Apply.
Display Motor Model
Information
The Motor Model dialog box displays more information that is based on the
motor type you select.
• If the motor data source is Database, this information is populated
automatically.
• If the motor data source is Nameplate Datasheet, this information must be
entered manually, or by running the optional Motor Analyzer.
• If the motor data source is Motor NV, this dialog box is blank.
The asterisk next
to a category
means that you
have not applied
changes.