User manual

242 Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015
Appendix A CIP Drive Module Properties
Figure 15 - Associated Axes Tab
Figure 16 - Associated Axes Tab for the Kinetix 5500 Drive
Figure 17 - Associated Axes Tab for the Kinetix 350 Drive
Figure 18 - Associated Axes Tab for the PowerFlex 755 Drive
Table 40 - Module Properties: Associated Axis Tab Descriptions
Parameter Description
Axis 1 Select the AXIS_CIP_DRIVE axis tag that you want to be associated as the full axis for
the drive module.
Axis 2 Select the axis that you want to be the half axis, if needed.
New Axis Opens the New Tag dialog box where you can create an AXIS_CIP_DRIVE axis.
Motor Feedback Device The motor feedback device is set to Motor Feedback Port and cannot be changed.
Load Feedback Device Click to select the port for the physical feedback device that is used by Axis 1 load
feedback.
Aux Feedback Port
Master Feedback Device Choose the port for the physical feedback device that is used by Axis 2 master
feedback.