User manual

Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015 237
CIP Drive Module Properties Appendix A
Network Tab
The Network tab provides you the network information for the port.
Figure 14 - Network Tab
TIP
The Network tab does not exist on the module properties of the PowerFlex
755 or Kinetix 350 drives.
Table 39 - Module Properties: Network Tab Descriptions
Parameter Description
Network Topology Displays the current network topology as either Linear/Star or Ring.
Network Topology has no value when offline, online and a module mismatch or
communication error has occurred.
Network Status Displays the current network status as either of the following occurs:
• Normal
• Ring Fault
• Unexpected Loop Detected
Network Status has no value when offline, online and a module mismatch or
communication error has occurred.
Active Ring Supervisor If the network topology is operating in a Ring mode, it displays the IP Address or
MAC Address of the Active Ring Supervisor.
Active Ring Supervisor appears dimmed if either of the following:
• Offline
• Online and a module mismatch or communication error has occurred
• The network topology is not operating in a Ring mode
Active Supervisor Precedence If the network topology is operating in a Ring mode, it displays the Active Ring
Supervisor’s precedence.
Active Supervisor Precedence appears dimmed if either of the following:
• Offline
• Online and a module mismatch or communication error has occurred
• The network topology is not operating in a Ring mode
Enable Supervisor Mode Displays the Supervisor mode of the module or, checks for the module to be
configured as a supervisor on the network.
Enable Supervisor mode appears dimmed if either of the following:
• Offline
• Online and a module mismatch or communication error has occurred