User manual

236 Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015
Appendix A CIP Drive Module Properties
Reset Module A reset module message appears stating that the module needs to be reset
before the modifications take effect. After you make modifications to either:
• Auto-Negotiate state
• Selected Speed
• Selected Duplex configuration values
Clicking Reset Module initiates a reset operation on the module, which returns
the module to its power-up state by emulating the cycling of power.
Refresh Communication Appears when communication with the module has failed. When you click
Refresh communication, an attempt is made to refresh communication with the
module.
Set Commits your modifications.
Set appears dimmed when you are offline or online and a module mismatch or
communication error has occurred or there are no pending edits on the tab.
Apply Accepts and applies your edits on any tab and you can continue configuring.
When you click Apply or OK, the information is automatically sent to the
controller. The controller tries to send the information to the module, if the
module’s connection is not inhibited.
Table 38 - Module Properties: Port Configuration Tab Descriptions
Parameter Description