User manual

Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015 235
CIP Drive Module Properties Appendix A
Table 38 - Module Properties: Port Configuration Tab Descriptions
Parameter Description
Port Port name.
Enable Enabled state of the port or check to enable the port.
Enable appears dimmed when you are offline or online and a module mismatch
or communication error has occurred.
Link Status Displays the link status as Inactive (port is inactive) or Active (port is active).
Link Status appears dimmed when you are offline or online and a module
mismatch or communication error has occurred.
Auto-Negotiate Displays the port’s auto-negotiate status.
• Check Auto-Negotiate to enable the module to negotiate the port’s speed
and duplex automatically.
• Clear the Auto-Negotiate checkbox to set the port’s speed and duplex
manually.
• Auto-Negotiate appears dimmed and checked when the module’s port and
duplex cannot be specified manually.
• Auto-Negotiate appears dimmed and unchecked when the port’s speed and
duplex are specified by the module.
Auto-Negotiate is unchecked and appears dimmed when you are offline, online
and Enable is unchecked, or online and a module mismatch or communication
error has occurred.
Selected Speed Displays the port’s selected speed if Auto-Negotiate is unchecked. You can also
select the port’s speed.
Valid speeds:
• 10 Mbps
• 100 Mbps
• 1000 Mbps
Selected Speed appears dimmed and has no value if either of the following
occurs:
• You are offline
• Online and Enable is unchecked
• Online and Auto-Negotiate is checked
• Online and Auto-Negotiate appears dimmed
• Online and a module mismatch or communication error has occurred
Current Speed Displays the port’s current speed.
Current Speed has no value when you are offline, online and Enable is
unchecked, online and a module mismatch, or communication error has
occurred.
Selected Duplex Displays the port’s selected duplex if Auto-Negotiate is unchecked. You can
select the port’s duplex. Valid duplexes are Half and Full.
Selected Duplex appears dimmed and has no value if either of the following
occurs:
• You are offline or online and Enable is unchecked
• Online and Auto-Negotiate is checked
• Online and Auto-Negotiate appears dimmed
• Online and a module mismatch or communication error has occurred
Current Duplex Displays the port’s current duplex.
Current Duplex is blank when you are offline, online and Enable is unchecked,
online and a module mismatch, or communication error has occurred.
Port Diagnostics Port Diagnostics appears dimmed when you are offline, online and Enable is
unchecked, online and a module mismatch, or communication error has
occurred.