User manual

232 Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015
Appendix A CIP Drive Module Properties
Table 37 - Module Properties: Internet Protocol Tab Descriptions
Parameter Description
Physical Module IP Address Displays physical IP address of the module or, if you selected to configure the IP
settings manually, enter a valid physical module IP address. See the IP address
for valid values.
• The Physical Module IP Address appears dimmed and has no value when you
are offline or online with a module mismatch or a communication error
occurs.
• The Physical Module IP Address also appears dimmed when you set the IP
address by using the switches on the module.
Both a warning message and the IP address that is entered on the General tab
appear when you enter a physical module IP address that does not match the IP
address that is entered on the General tab.
The warning message does not display when you are offline or online and a
module mismatch or communication error occurs. You can click Copy IP address
from the General tab so that the Physical Module IP Address matches the IP
address on the General tab.
It appears only when you choose to configure the IP settings manually and
when there is a mismatch between the IP address in the physical module and
the IP address entered on the General tab.
Subnet Mask Displays the subnet mask of the module or, if you selected to configure the IP
settings manually, enter a valid subnet mask.
• The Subnet Mask appears dimmed and is blank when you are offline or
online and a module mismatch or communication error occurs.
• The Subnet Mask appears dimmed when the module supports the option to
set the IP address by using the switches and you choose to set the IP address
using the switches.
Gateway Address Displays the gateway IP address of the module or, if you selected to configure
the IP settings manually, enter a valid gateway address.
• The Gateway Address appears dimmed and is blank when you are offline or
online and a module mismatch or communication error occurs.
• The Gateway Address appears dimmed when the module supports the
option to set the IP address by using the switches and you choose to set the
IP address using the switches on the module.
Domain Name Displays the domain name of the module or to configure the IP settings
manually, enter a valid domain name. See Domain Name for valid values for the
domain name.
• The Domain Name appears only if the module supports a domain name. It
appears dimmed and is blank when you are offline or online and a module
mismatch or communication error occurs.
• The Domain Name appears dimmed when the module supports the option
to set the IP address by using the switches and when you choose to set the IP
address by using the switches on the module.
Host Name Displays the host name of the module or, enter a valid host name. A warning
message appears when the host name in the physical module does not match
the host name on the General tab. Make sure that the host name entered here
matches the host name on the General tab and click Set.
The Host Name appears only if the module supports a host name. It appears
dimmed and is blank when you are offline or online and a module mismatch or
communication error has occurred.
Primary DNS Server Address Displays the primary DNS server IP address of the module or, if you selected to
configure the IP settings manually, enter a valid primary DNS server address.
• The Primary DNS Server Address appears only if the module supports a
primary DNS server address. It appears dimmed and is blank when you are
offline or online and a module mismatch or communication error occurs.
• The Primary DNS Server Address appears dimmed when the module
supports the option to set the IP address by using the switches that you
choose to set the IP address by using the switches on the module.