User manual

Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015 229
CIP Drive Module Properties Appendix A
• For more information about the Time Sync tab, see Set Time
Synchronization on page 92.
• For detailed information about CIP Sync, see the Integrated Architecture
and CIP Sync Configuration Application Technique,
publication IA-AT003
.
Module Info Tab
The Module Info Tab displays module and status information. You can also reset
a module to the power-up state. Use this tab to determine the identity of the
module. The data on this tab comes directly from the module. If you selected a
Listen-Only communication format when you created the module, this tab is not
available. You cannot see any values if you are offline or you are creating a module.
When you are online with the controller, you can review real time drive status
information. When you are offline, no values display.
Table 35 - Time Sync Tab Descriptions for the Local Clock
Parameter Description
Local Clock Specifies clock property information for the local clock. The Local Clock values appear
dimmed in offline mode or when PTP is disabled.
Synchronization Status Specifies whether the local clock is synchronized with the Grandmaster reference
clock. The value is 1 if the local clock is synchronized and zero if the local clock is not
synchronized. A clock is synchronized if it has one port in the slave state and is
receiving updates from the time master.
Offset Master Specifies the amount of deviation between the local clock and the Grandmaster clock
in nanoseconds.
Backplane State Specifies the state of the backplane.
Ethernet State Specifies the state of the Ethernet port.