User manual

Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015 223
Appendix A
CIP Drive Module Properties
Use this appendix for a description of each tab of the CIP drive Module
Properties dialog box.
Module Properties
The Module Properties dialog boxes provide the configuration information that
you use to configure your CIP drive module. For all tabs, when you click Apply,
the software accepts and applies your edits and you can continue configuring
your module. When you are online, the information is automatically sent to the
controller. The controller tries to send the information to the module, if the
connection to the module is not inhibited. These examples show the Kinetix
6500 drive module properties pages. Other module property pages for drives,
such as PowerFlex 755, Kinetix 350, and Kinetix 5500 servo drives are noted
where appropriate.
Topic Page
General Tab 224
Connection Tab 226
Safety Tab 227
Time Sync Tab 228
Module Info Tab 229
Internet Protocol Tab 231
Port Configuration Tab 233
Network Tab 237
Associated Axes Tab 240
Power Tab 244
Digital Input Tab 247
Motion Diagnostics Tab 248