User manual

22 Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015
Chapter 1 Configure Integrated Motion Control Using Kinetix Drives
4. Type a Name for the module.
5. Type a description, if desired.
6. Assign an EtherNet/IP address.
For Private Network segments, you can establish the Node Address of the
drive by entering a private IP address via a thumbwheel switch on the drive,
using the format 192.168.1.xxx, where the last octet, xxx, is the switch
setting.
See the EtherNet/IP Modules in Logix5000 Control Systems User
Manual, publication ENET-UM001
, for information on setting IP
addresses and other Ethernet network considerations.
7. Under Module Definition, click Change.