User manual

Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015 211
Chapter 10
Faults and Alarms
There are four ways to find and view faults and alarms:
• Fault and Alarm Log
• QuickView Pane
• Tag Monitor, see the individual fault-related attributes
• Drive Status Indicators
Faults and Alarms Dialog Box
The Faults and Alarms dialog box displays the status of faults and alarms in the
controller for an axis. The display is read-only except for the ability to clear logs.
Fault and alarm entries are displayed only when you are online with a controller.
When online, check or clear the checkboxes in the Show row to toggle between
showing and hiding the specified group of entries. The last 25 faults and alarms
only display.
Figure 6 - Faults and Alarms Log
Topic Page
Troubleshoot Faults 214
Manage Motion Faults 215
Configure the Exception Actions for AXIS_CIP_DRIVE 216
Inhibit an Axis 219