User manual

172 Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015
Chapter 7 Commission
This dialog box is an example of axis indicator values.
You can also get to the commands either by right-clicking the axis and choosing
Motion Generator or on the Manual Tune dialog box.
For more information about the Flying Start Attribute, see the Integrated Motion
on the EtherNet/IP Network Reference Manual,
publication MOTION-RM003
.
IMPORTANT
If you are using a PowerFlex 755 drive and it’s configured for Velocity Mode,
and you have set the Flying Start Enable attribute to true, the device starts
spinning at the command velocity immediately after you execute an MDS
command.