User manual

140 Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015
Chapter 6 Axis Configuration Examples for the PowerFlex 755 Drive
Example 5: Frequency Control with No Feedback, Scaling Dialog Box Conversion Units
7. From the Load Type pull-down menu, choose the appropriate load type.
8. Enter the Transmission Ratio.
9. From the Actuator Type pull-down menu, choose the appropriate actuator.
10. Enter the Diameter dimensions.
11. Enter the Scaling Units.
See the Scaling Dialog Box on page 146
for more information.
12. From the Travel Mode pull-down menu, choose the appropriate travel
mode.
13. Click Apply.
You are now finished configuring the axis for Frequency Control with No
Feedback.