User manual

Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015 137
Axis Configuration Examples for the PowerFlex 755 Drive Chapter 6
Example 5: Frequency
Control with No Feedback
In this example, you are configuring an axis for Frequency Control with No
Feedback.
1. Once you have created the AXIS_CIP_DRIVE axis, open the Axis
Properties.
2. From the Axis Configuration pull-down menu, choose Frequency
Control.
3. From the Feedback Configuration pull-down menu, choose No Feedback.
Example 5: Frequency Control with No Feedback, General Dialog Box
This shows you the type of drive you selected and
power structure you assigned via the PowerFlex 755
drive Module Properties.
See Add a PowerFlex 755 Drive on page 49
.
The newly created PowerFlex 755 drive module
name is the default. The Axis Number defaults to
1, indicating the primary axis of the drive. Axis
Number 2 is used only for configuring a Feedback
Only axis.
This defines the controller Control Mode.
See the Integrated Motion on the EtherNet/
IP Network Reference Manual, publication,
MOTION-RM003
.