User manual

136 Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015
Chapter 6 Axis Configuration Examples for the PowerFlex 755 Drive
Example 4: Velocity Loop with No Feedback, Load Dialog Box
8. From the Load Coupling pull-down menu, choose the appropriate load
coupling.
9. Enter the System Inertia.
10. Enter the Torque Offset, if applicable.
For more information about the load characteristics, see Load Dialog Box
on page 164.
11. Click Apply.
You are now finished configuring an axis as Velocity Loop with No Feedback.