User manual

Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015 127
Axis Configuration Examples for the PowerFlex 755 Drive Chapter 6
For more information about Commutation, see Commutation Test on
page 156.
Example 2: Position Loop with Dual Feedback, Motor Feedback Dialog Box
On the Motor Feedback dialog box, the information is automatic based on
your selections on the Motor dialog box.
The axis is now configured as a Position Loop with two feedback devices.
The next task is to configure Feedback 2 on the Load Feedback dialog box.
If you have not defined a feedback device, the motor dialog box
displays a link taking you to the module definition for the drive.