User manual

126 Rockwell Automation Publication MOTION-UM003F-EN-P - March 2015
Chapter 6 Axis Configuration Examples for the PowerFlex 755 Drive
4. From the Data Source pull-down menu, choose Catalog Number.
Example 2: Position Loop with Dual Feedback, Motor Dialog Box
5. Click Change Catalog and choose your motor.
In this case, a MPL-B310P-M motor was chosen.
When you select the Catalog Number for the motor specification,
the MPL-B310P-M motor is in the Motion Database. The specification
data for this motor is automatically entered for you. If the motor you are
using is not listed in Change Catalog, then it is not in the Motion
Database. You have to enter the specification data on your own.
The Motor Feedback dialog box is automatically filled based on your
motor selection.
Example 2: Position Loop with Dual Feedback, Motor Feedback Dialog Box
6. Choose the Commutation Alignment.