Product manual

Technical specification
Product Specification IRB 6400R M99/BaseWare OS 3.2 39
3.6 Automatic Operation
The following production window commands are available:
- Load/select the program.
- Start the program.
- Execute instruction-by-instruction (forward/backward).
- Reduce the velocity temporarily.
- Display program-controlled comments (which tell the operator what is
happening).
- Displace a position, also during program execution (can be blocked).
3.7 Maintenance and Troubleshooting
The following maintenance is required:
- Changing filter for the transformer/drive unit cooling every year.
- Changing grease and oil every third year.
- Changing batteries every third year.
- Some additional checks every year.
The maintenance intervals depends on the use of the robot. For detailed information on
maintenance procedures, see Maintenance section in the Product Manual.