User`s manual

UNIX
Section 8: Setting Up - UNIX AXIS 5400+ User’s Manual
88
This is the default setting for logical printers PR5 through PR8.
Example: Assume that you want to replace the UNIX New Line (hex
0A) with
an ASCII NewLine (hex
0D 0A), and the printer command
E
C
G1
(hex
1B 47 31) with
E
C
Y (hex 1B 59) for logical printer PR2.
Follow the instructions below to substitute command strings:
1. From the print server’s internal web page, select Admin | Logical
Printer Settings.
2. Select the Printer2 tab.
3. Enter the string 01 0A 02 0D 0A 03 1B 47 31 02 1B 59 in the
String Substitutions text field.
4. Click the OK button when finished.
Note:
Hex code Explanation
01 length of the UNIX New Line command
0A the UNIX New Line command
02 length of the ASCII New Line command
0D 0A the ASCII New Line command
03 length of the replaced printer command
1B 47 31 the replaced printer command
02 length of the new printer command
1B 59 the new printer command
Extensive use of string substitutions will naturally decrease the throughput rate of
the AXIS 5400+.