User`s manual

UNIX
Section 8: Setting Up - UNIX AXIS 5400+ User’s Manual
86
4. Click OK when finished.
The ISO 8859-2 printer data that is sent to logical printer PR1
converts to IBM PC Set 2.
Adding Strings Before
and After Print Jobs
These string functions provide a way to send printer control
commands before and after each print job. They may be specified
individually for each logical printer.
All strings are entered as hexadecimal byte values.
Example: Assume that the logical printer PR5 is configured as a PostScript
printer and that you want to append the PostScript End of File
character (hex
04) after each print job.
Follow the instructions below to add a string after the print job:
1. From the print server’s internal web page, select Admin | Logical
Printer Settings.
2. Select the Printer5 tab.
3. Enter the string 04 in the String After Print Job text field.
4. Click the OK button when finished.
Example: You have an HP LaserJet printer with dual input bins, and want to
print on pre-printed forms when using the logical printer PR4. The
standard forms are taken from bin 1, and the pre-printed forms are
taken from bin 2. The string before print job should contain the
command to select bin 2,
E
C
l4H (hex 1B 26 6C 34 48), and the string
after print job should contain the command to select bin 1,
E
C
l1H
(hex
1B 26 6C 31 48).
Follow the instructions below to add strings before and after the print
job:
1. From the print server’s internal web page, select Admin | Logical
Printer Settings.
2. Select the Printer4 tab.