User`s manual

UNIX
Section 8: Setting Up - UNIX AXIS 5400+ User’s Manual
78
Section 8 Setting Up - UNIX
Installation in the UNIX Environment
Having performed the basic TCP/IP setup procedures as defined in
Assigning an IP address, on page 22 and onwards, you are now able to
print in interactive mode using LPR, FTP or Reverse Telnet protocols.
However, should you require to integrate the AXIS 5400+ into your
host spooler, you can use the Axis automatic installation script
axinstall. This utility software is resident on the AXIS 5400+ and can
be downloaded to your host using FTP, so no disks are required. The
axinstall script can also be downloaded from the Axis web:
http://www.axis.com/ and it is available on the AXIS Product CD.
Having completed this operation, the printer connected to the AXIS
5400+ will appear as though they are directly connected to the host
printer spooler.
If you intend to operate your AXIS 5400+ in a multiprotocol
environment, you should also proceed according to one or more of the
following sections, as appropriate to your network.
Section 5 Setting Up - NetWare, on page 53
Section 4 Setting Up - Windows, on page 32
Section 6 Setting Up - OS/2, on page 66
Section 7 Setting Up - Macintosh, on page 72