User`s manual

Macintosh
AXIS 5400+ User’s Manual Section 7: Setting Up - Macintosh
77
6. Write a text file containing the parameters you want to set:
Parameters that you do not want to set should be excluded from
the text file.
Refer to 13 - The Parameter List, on page 143, for information
about which values that are valid for each parameter.
7. Print the text file. The settings will be stored in the print server.
8. Open the Chooser and select the printer port you wish to use for
printing documents.
9. Close the Chooser.
Note:
BINARY_TYPE_1. :BCP
INT_ADDR. :192.168.3.191
ATYPE_1. :EPSONLQ2
The _CFG port disappears 60 minutes after the AXIS 5400+ has been powered
on. If you want it to reappear, you must restart your AXIS 5400+.