User`s manual

NetWare

Section 5: Setting Up - NetWare AXIS 5400+ User’s Manual

9. Select an appropriate NetWare Print Server name, that will be

associated with the AXIS 5400+ print server, by using the

Browse... button.

Notes:

10. If you want to define a remote printer number slot manually,

check the Manual box and type the desired number in the box.

11. Click the OK button to return to the Network Environments

window.

Basic Queue-based printing over IP

Axis print servers with software version 6.0 or later allow users to print

in a Pure IP environment using traditional queue-based printing

(which usually uses the IPX transport protocol). Note that only NDS

queue based printing is supported.

In the NetWare Pure IP environment, you must use NetWare

Administrator to create the printer, print server and queue objects.

Installing the

AXIS 5400+

Follow the instructions below to install the AXIS 5400+ in the

NetWare Pure IP environment:

1. Start the Configuration Wizard from the User mode in the AXIS

5400+ Web interface.

2. Click your way through the Wizard until reaching the NetWare

page.

You cannot type or edit the name manually

Make sure that you have PSERVER.NLM running if you selected Remote Printer

Mode in step 8.