User`s manual

NetWare
Section 5: Setting Up - NetWare AXIS 5400+ User’s Manual
56
3. Use the NetWare Administrator to create an NDPS printer as an
object in the NDS Tree.
4. Create a new Printer Agent (PA) or convert a Public Access
Printer to a Controlled one.
5. Choose the Axis Gateway configuration. Select TCP/IP or IPX as
transport protocol and complete required tasks.
6. You are now ready to print in your NDPS environment. Your
printer will appear as an NDS object in the Directory Tree and
will offer a full range of network security options.
Use the Novell Print Manager to install the controlled access printer
on a client workstation.
Basic Setup with AXIS NetPilot
Follow the instructions available on the AXIS Product CD to install
the AXIS NetPilot software on to your computer. AXIS NetPilot runs
on any of the Windows platforms; Windows 3.x, Windows 95,
Windows 98, Windows NT, Windows 2000, Windows ME and
Windows for Workgroups.
Starting the
Installation
Follow the instructions below to install the AXIS 5400+ with AXIS
NetPilot:
1. Start AXIS NetPilot by double-clicking the NetPilot icon, which
is located in the folder where you installed AXIS NetPilot.
2. Locate the AXIS 5400+ in the ‘New Axis Units’ folder. Select it
and click the Install button on the AXIS NetPilot toolbar. If your
network is large, it could take a few seconds before the print server
appears in the folder.