User`s manual

NetWare
UNIX
Windows
OS/2
Macintosh
AXIS 5400+ User’s Manual Section 3: Basic Installation
31
3. If it is not already running, start the BOOTP daemon. This is
typically performed using the
bootpd command.
4. Restart the AXIS 5400+ to download the IP address, default
router address, and subnet mask.
The AXIS 5400+ can automatically download a customized config file
from a TFTP server. Just add the name of the config file and the
TFTP server’s IP address to your boot table. The config file is
downloaded immediately after the AXIS 5400+ receives its IP address.
DHCP and Auto-IP Auto-IP is another tool for setting the IP-address of the print server in
the absence of a DHCP server.
If you have a DHCP server running on your network, the AXIS
5400+ will receive an IP address immediately after you have connected
it to the network. In the absence of a DHCP server, your AXIS 5400+
print server will automatically be assigned an IP-address through
integrated Auto-IP. The Auto-IP function is enabled by default and
does not require any configuration by the user.