User`s manual

NetWare
UNIX
Windows
OS/2
Macintosh
AXIS 5400+ User’s Manual Section 3: Basic Installation
23
Methods for setting
the IP Address
The IP address of your AXIS 5400+ can be set using the following
methods, depending on your network operating environment:
*The IP-address of your print server is set automatically when using
these methods.
Notes:
Method
Network
environments
See ...
AXIS Print System
Windows
95/98/NT/2000
Set the print server’s IP address using
AXIS Print System version 1.20, on page
25
AXIS IP
JumpStarter
Windows
95/98/NT/2000
Set the print server’s IP address using
AXIS IP JumpStarter, on page 26
DHCP*
Windows
NT/2000,
UNIX, Net-
Ware 5, OS/2
Setting the print server’s IP address
using DHCP, on page 27
ARP
Windows
95/98/NT/2000,
OS/2
Setting the print server’s IP address
using ARP in Windows and OS/2, on
page 28
UNIX Setting the print server’s IP address
using ARP in UNIX, on page 29
RARP*
UNIX Setting the print server’s IP address
using RARP in UNIX, on page 29
BOOTP*
UNIX, Net-
Ware 5, OS/2
Setting the print server’s IP address
using BOOTP in UNIX, on page 30
AXIS NetPilot
Windows
95/98/NT/2000,
NetWare 5
Assigning an IP address, on page 22
Auto-IP*
Windows
98/2000,
DHCP and Auto-IP, on page 31
The ARP and RARP methods operate on single network segments only, i.e. they
cannot be used over routers.
Refer to Setting Parameters, on page 76 for information about setting the IP
address in the Macintosh environment.