User`s manual

NetWare
UNIX
Windows
OS/2
Macintosh
Section 3: Basic Installation AXIS 5400+ User’s Manual
22
Assigning an IP address
To establish communication with the TCP/IP network, enabling
TCP/IP printing and Web browser management, an IP address must
be assigned to your AXIS 5400+.
Before you start
System privileges You need root privileges on your UNIX system, or administrator
privileges on a Windows NT server to set the IP address using ARP,
RARP, BOOTP or DHCP.
Ethernet address You need to know the Ethernet address of your AXIS 5400+ to
perform the installation. The Ethernet address is based upon the serial
number of your AXIS 5400+. This means, for example, that an AXIS
5400+ with the serial number of 00408C100086, will have the
corresponding Ethernet address of 00 40 8C 10 00 86.
The serial number is located on the bottom label of the print server.
IP address Unless you are downloading the IP address using DHCP, you must
obtain an unused IP address from your network administrator.
Important:
DO NOT use the IP addresses used in the following examples when installing
your AXIS 5400+. Always consult your network administrator before assigning
an IP address to your AXIS 5400+.