User`s manual

NetWare
UNIX
Windows
OS/2
Macintosh
Section 3: Basic Installation AXIS 5400+ User’s Manual
20
Notes:
Installation Guide
Installation Methods The method of installation that you choose should be dictated by your
printing requirements and your supported network environments.
Select the appropriate installation method from the table below:
The test page includes a list of the most important print server parameters,
including IP address, network speed and the firmware version number.
The AXIS 5400+ uses high speed Centronics Communication. For use with
older printers not supporting high speed, this function can be disabled by using
any standard Web browser. Please refer to Section 9 Management &
Configuration, on page 92, for more information.
Environment Network Configuration Action
Windows
TCP/IP See Section 4 Setting Up - Windows, on page 32
NetBIOS/NetBEUI See Section 4 Setting Up - Windows, on page 32
NetWare
NDPS (Pure IP) See Assigning an IP address, on page 22
See Setup using NDPS, on page 54
Standard NetWare
(Pure IP)
See Assigning an IP address, on page 22
See Basic Queue-based printing over IP, on page 62
NDPS (IPX) See Setup using NDPS, on page 54
Standard NetWare (IPX) See Assigning an IP address, on page 22
Advanced configuration
(IPX)
See Assigning an IP address, on page 22.
Proceed with Basic Setup with AXIS NetPilot, on page 56
OS/2
TCP/IP See Assigning an IP address, on page 22
Proceed with Section 6 Setting Up - OS/2, on page 66
NetBIOS/NetBEUI See Section 6 Setting Up - OS/2, on page 66
Macintosh AppleTalk See Section 7 Setting Up - Macintosh, on page 72
UNIX
TCP/IP See Assigning an IP address, on page 22
Proceed with Section 8 Setting Up - UNIX, on page 78