User`s manual

NetWare
UNIX
Windows
OS/2
Macintosh
Section 11: Upgrading the Software AXIS 5400+ User’s Manual
138
Upgrading the Firmware
You can upgrade the AXIS 5400+ firmware using one of the following
methods:
• From the print server’s internal web pages
• AXIS ThinWizard (TCP/IP)
• FTP (TCP/IP)
• AXIS NetPilot Upgrade Wizard (IPX/SPX)
Note:
Upgrading from the
Print Server’s Internal
Web Pages
Follow these instructions to upgrade the firmware of your print server
from its internal web pages (Web Flash-loading):
1. Open your web browser, enter the IP address of your print server
and press Enter. (See Management & Configuration, on page 92
for detailed instructions on accessing your Axis print server on the
web).
2. From the admin-mode, click the ’Firmware Upgrade’ button.
From here you can download the latest available firmware to your
computer and upgrade your print server with it.
Upgrading using
AXIS ThinWizard
AXIS ThinWizard is a tool that enables batch upgrading of several
print servers and should be used for upgrading the flash memory in
TCP/IP networks.
You must assign the AXIS 5400+ with an IP address, as described in
Assigning an IP address, on page 22, before you can use this upgrading
method.
Follow the instructions below to upgrade your print servers using
AXIS ThinWizard:
1. Click the Manage Network button in the AXIS ThinWizard
main menu.
Updating instructions are also supplied with the software update.