User`s manual

NetWare
UNIX
Windows
OS/2
Macintosh
AXIS 5400+ User’s Manual Section 9: Management & Configuration
117
Using HP Administration Tools
The AXIS 5400+ is fully compatible with the HP JetAdmin and the
HP Web JetAdmin printer management software. You can use either
tool to install and configure your printer devices, and to monitor the
current status of your AXIS 5400+ and the connected printers.
Please refer to the appropriate Hewlett Packard documentation for
further details about these tools.
Note:
To enable support for the HP JetAdmin and the HP Web JetAdmin
management software, you must set the HP_JETADMIN parameter to YES.
It is not possible to upgrade the AXIS 5400+ Flash Memory from the HP
JetAdmin.
If the AXIS 5400+ has been configured with HP JetAdmin or HP Web JetAdmin,
you cannot configure it with AXIS NetPilot unless you first reset it to the factory
default settings.