User`s guide

AXIS 540+/AXIS 560 User’s Guide

TCP/IP:

DNS/DHCP, BOOTP, ARP, RARP, DHCP, ICMP, IGMP, TCP/IP, UDP, HTTP, LDP, FTP, Telnet, Reverse

Telnet, PROS.

Apple EtherTalk:

AAPR, ATP, DDP, NBP, PAP, RTMP, ZIP.

NetWare:

Encrypted passwords, NetWare Packet Signature Level 1, 2, 3.

UNIX/Linux:

Root password (default user = root, default password = pass), User access list and printer access.

Network Management:

Print server/job/printer status presentation and management via NWAdmin/PCONSOLE.

AXIS ThinWizard for monitoring, configuration and firmware upgrade.

Available languages in print server’s web interface:

English, French, German, Italian, Japanese, Spanish.

Network Connection:

All standard Ethernet networks: RJ-45 connector (Category 5 or 6, sheilded twisted pair cable) for

10 baseT Ethernet with full duplex. Supports IEEE802.2, IEEE802.3, SNAP and Ethernet II frame

types simultaneously.

Logical Printers:

Logical printer ports can be programmed to perform auto ASCII-to-PostScript conversion, string

before and after job, string substitution, alternative output and character set conversion.

Printer Ports:

• AXIS 540+: Parallel port: One 36-pin Centronics connector. Highspeed IEEE 1284 compliant

with ECP support and throughput of 1 MB/sec.

• AXIS 560: Parallel port: Two 25-pin DSUB connector. Highspeed IEEE 1284 compliant with ECP

support and throughput of 1 MB/sec.

Serial port: 9-pin DSUB connector, RS-232, XON/ XOFF or RTS/CTS, data rates up to 115.200 baud