User`s guide

AXIS 540+/AXIS 560 User’s Guide

3. Enter the following command to download the

axinstall

script (make sure you use the ASCII

transfer mode):

4. Exit from the ftp program and enter the following command to install the AXIS 540+/AXIS 560

using the

axinstall

script. Follow the instructions that appear when the script has started.

Note:

If you need additional instructions, please refer to the AXIS 540+/AXIS 560 User’s Manual which

is available on www.axis.com

Proceed to Print Server Management and Configuration on page 24 for information on supported

management and configuration tools.

get axinstall

sh axinstall (or sh ./axinstall depending on your system)

• LPRng is not supported by axinstall

• You need root privileges on your UNIX/Linux in order to run axinstall

• PROS is a protocol developed by Axis Communications. It comes in two versions;

named pipe (PROS A) and filter (PROS B).