User`s guide

AXIS 540+/AXIS 560 User’s Guide
10
2.2.1 Set the IP address manually using AXIS IP JumpStarter software
AXIS IP JumpStarter software is used for locating print servers on your LAN and assigning IP
addresses to them.
1. Install AXIS IP JumpStarter. It is available free of charge on www.axis.com
2. Select a print server from the serial number list in the IP JumpStarter dialog window. The serial
number of the print server is displayed on the printed label on its backside and on the printed
test page.
3. From the Server menu, select Set IP Address.
4. Click the radio button that corresponds to your choice of IP setting method. You must define
the Subnet Mask and Default Gateway when assigning a static IP address.
5. Click OK to save your settings.
6. Enter the server root password (by default set to pass), and click OK.
7. The AXIS 540+/AXIS 560 will appear in the list with the assigned IP address.
8. To verify that you have access to the print server’s web pages, highlight the print server in the
list and select Server Home Page from the Server menu.
Note:
If your print server does not appear in the serial number list, refer to the AXIS IP JumpStarter
online help files!
Click here to
access the
print server’s
internal
web pages.