User`s manual

Management and Configuration
AXIS 540+ / AXIS 560 User’s Manual 93
Example:
Typical Telnet session to view the Account File
Viewing
the Status file
The status command shows which printer port the logical printers are
assigned to, and their current status.
Follow the instructions below to view the status file using telnet:
1. Log in to the Axis Network Print Server by typing:
telnet <host name> or telnet <IP address> in a DOS window
(Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
root and pass.)
3. View the status file by typing:
status
Performing Resets Three types of reset commands allow you to perform soft resets, to
perform hard resets, and to reset the print server’s parameters to its
default settings.
Follow the instructions below to perform a soft reset using telnet:
1. Log in to the Axis Network Print Server by typing:
telnet <host name> or telnet <IP address> in a DOS window
(Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
root and pass.)
> telnet npserver
Trying 192.36.253.96...
Connected to npserver.
Escape character is ‘^]’.
AXIS 560 TELNET Network Print Server V7.00 Sep 06 2004
Axis Network Print Server network login: root
Password: pass
(not visible)
Axis Network Print Server TELNET Print Server v6.30 Dec 16 2000
Root> account
Current account file:
JOB USER PROT LPR S BYTES ETIME OTIME
1 Thomas FTP pr2 C 1885 2 0
2 Joe LPT pr1 C 23074 4 0
3 RICHARD PSERVER pr2 C 43044 5 0
4 MacUser APPLE pr1 C 6717 2 0
5 LSLM_user NetBIOS pr2 C 36995 3 0
6 patrick PROS pr5 P 83208 9 0
Root>