User`s manual

Adding Printers in NetWare
50 AXIS 540+ / AXIS 560 User’s Manual
12. Select TCP/IP (default) or IPX as network protocol.
13. Click Next.
14. You will find the print server in the next window with the printer attached
on the connected port.
Depending on the transport protocol you used when you start the
installation, the print server will appear as:
• TCP/IP Network protocol:
IP Address and Port, e.g:
192.168.70.243 and LPT1
Only the ports with a connected printer will show up in this window.
If the printer is not in the displayed print list:
1. Click Manually specify the print server enter the print server’s IP address
in the IP Address field and choose a port in the Print server port field
e.g., 192.168.70.243 and LPT1
Ports available Parallel port 1 Parallel port 2 Serial port
AXIS 540+ LPT1 — —
AXIS 560 LPT1 LPT2 COM1