User manual

Accessory 24E2
Option 1D: If Option 1D Piggyback Board is ordered, the circuitry and input/output connectors are
provided for the third and fourth channels associated with the Servo IC on the main ACC-24E2.
ACC-24E2 Power Supply Requirements
The following table lists the power requirements for the entire ACC-24E2 family of products for the
UMAC-Turbo and UMAC-MACRO. Because of the flexibility of these products, the power
requirements for all ACC-24E products are listed.
Product 5V 12V for DACs -12V for DACs 12V-24V for Flag Circuits
ACC-24E2 700mA N/A N/A
ACC-24E2 opt. 1 200mA N/A N/A
ACC-24E2A 800mA 200mA 200mA
ACC-24E2 opt. 1A 200mA 200mA 200mA
ACC-24E2S 600mA N/A N/A
2 Introduction