User`s manual

7
AXIS 292 - Product Description
AXIS 292 Front Panel
Indicators - After completion of the startup and self test routines, the multi-colored
Network, Status, Power and Video Indicators flash as follows:
Control Button - Press this button to restore the factory default settings, as described in
Default, on page 21.
Video Select Button - Press this button to connect/disconnect the product to the video
stream. When the video stream is disconnected, the IP address of the AXIS 292 as well as
the IP address of the video encoder will be shown as an overlay on the TV monitor.
Note: If the settings of a connected Motion JPEG video source are changed, it is necessary to first disconnect and
then reconnect the video source for the settings to take effect on the decoded video signal.
Power Green Normal operation
Green/Amber Flashes green/amber during upgrade
Status Green Normal operation
Green/Amber Flashes green/amber during startup
Red Hardware error
Amber Resetting to factory default
Red Flashes for an illegal serial number
Network Amber Flashes for activity on a 10 Mbit/s network
Green Flashes for activity on a 100 Mbit/s network
None No connection
Video Red Video disconnected
Amber Connecting
Green Video connected
Control
Button
Video Select
Button